Replacing blades

1. Unplug and turn off Slice Elite™.
2. Place Slice™ design cutter on its side or upside-down.
3. Guide the pinching ends of the blade replacement tool to the small, orange blade inside the round blade encasement.
4. Squeeze the tool with your fingers around the orange blade.
5. Hold the blue ribbed side of the blade replacement tool in place and slide the grey side up.
6. Pull blade replacement tool away from the base of the Slice Elite™.

Note: To move the blade up or down, use the blade adjustment wrench to tighten or loosen the blade housing.

Note: To ensure proper cutting, always home the blade after replacing blade. See “Homing the Blade” in Basic Operations.

Cleaning Slice™ Elite

Gently wipe exterior of Slice™ Elite with slightly damp cloth.

Note: Do not use chemical-based or alcohol-based cleaners on Slice™ Elite, including, but not limited to, acetone, benzene and carbon tetrachloride. Do not clean with abrasive materials. Do not immerse in water or other liquids.

Care and cleaning of the glass cutting mat

1. Use only the recommended repositionable adhesive (see step 2 page 10 in User Manual).
2. Clean the mat with a damp cloth or mild soap and water, then promptly dry it off.
3. Do not drop the mat.
4. Always use on a flat surface.
5. Do not use abrasive cleaners or chemicals.
6. Do not wash in dishwasher.