Thank You for signing up for our newsletter.
FREQUENTLY ASKED QUESTIONS
New technology often generates a flurry of new questions. Look here for information about your SLICE™ and to answer questions you may have about this clever little personal design cutter and its expandable accessories. If your answer is not listed here, please make sure to Submit an Issue so we can address your questions immediately.Adhesive
How long does the adhesive need to dry?
Allow the adhesive to dry at least two minutes. The adhesive remains white while wet and turns clear when dry. The dry time will vary depending upon humidity.
Basic Use
Do you hold the Start button while cutting?
No. Press the Start button only once to begin cutting.
Do you hold the SLICE™ unit in place during the entire cutting process?
Yes. Hold it lightly with both hands as described in “Basic Operations.”
This prevents the unit from moving during the cutting process.
How do I stop the SLICE™ in the middle of a cut?
Cancel it by pressing the MENU button on the keypad.
Can I leave the glue on my glass mat or do I need to wash it off after each use?
Instead of washing the glue off the glass cutting mat after each use, leave a piece of scrap paper over the mat and store. Peel the paper off the glass cutting mat when you are ready to use the SLICE™ Cordless Design Cutter again.
Battery
How long does it take to charge the battery?
Approximately 1 hour.
How long does the battery charge last?
Approximately 45 minutes of cutting, though this may vary.
Can the SLICE™ be used while plugged in?
Yes.
Can I leave the unit plugged in while not in use?
Yes, this will charge the battery.
