 
|
Replacing the BladeTo remove a used blade from Slice™ unit:1. Unplug and turn off Slice™ unit. 2. Place Slice™ design cutter on its side or upside-down. 3. Guide the pinching ends of the blade replacement tool to the small, orange blade inside the round blade. 4. Squeeze the tool with your fingers around the orange blade. 5. Hold the blue ribbed side of the blade replacement tool in place and slide the grey side up. 6. Pull blade replacement tool away from the base of unit. To insert new blade into the Slice™ unit: 1. Use blade replacement tool to remove new blade from storage base. 2. Insert new blade, stem first, into hole in the round blade encasement. 3. Lightly pat down blade with tool tip to ensure a snug fit. |
